Vitano Hybrid (HV) Battery Cooling Intake Filter. Unlike engine or cabin filters, this is a specialized screen located inside the car (usually near the rear seats) that prevents dust from entering the hybrid battery's cooling fan.
Keeping this filter clean is critical because a clogged battery filter is a leading cause of hybrid battery overheating and premature failure.
1. Main Car Compatibility
This filter is used in Toyota’s 4th and 5th generation hybrid systems:
Model
Generation / Chassis
Year Range
Toyota Prius
ZVW50, ZVW51, ZVW55
2016 – 2022
Toyota Prius Prime
ZVW52 (Plug-in)
2017 – 2022
Toyota Corolla Hybrid
ZWE211
2019 – Present
Toyota C-HR Hybrid
ZYX10, ZYX11
2016 – Present
Lexus UX250h
MZZA10, MZAH10
2018 – Present
2. Technical Specifications
Type: Plastic frame with a fine mesh/non-woven synthetic screen.
Dimensions: Approximately 185 mm × 127 mm.
Function: Filters air sucked in by the battery cooling fan to keep the high-voltage cells cool.
Location: Usually found on the side of the rear seat bolster (passenger side) or under the rear seat.
3. Common Cross-Reference
Toyota (Interchange): G92DH-47010 (Earlier version for some Prius models).
4. Maintenance Tip for Your Customers
Service Interval: This filter should be inspected every 10,000 km and replaced or cleaned every 20,000–30,000 km.
The "Hybrid System Malfunction" Warning: Many Prius owners get a warning light on the dashboard that says "Maintenance Required for Hybrid Battery Cooling Parts." Replacing this filter (G92DH-47070) is almost always the solution to that error.
Vitano Hybrid Battery Cooling Filter
